News   News
Search
Contact us
Your position:Home > News > IndustryNews

The mini centrifuge uses the company's unique patented electrostatic technology

2018/5/4 15:52:52      click :
The appearance of the mini centrifuge is similar to the new rice cooker on the market. It is small and exquisite, and it is very popular among the industry. But not only for this reason, but the main reason is that the mini centrifuge is very useful and efficient. The common styles in the current market are microcentrifuges, mini-centrifuges of low speed, etc., many of which can be developed according to the needs of the client.
The safe and stable operation of the mini-centrifuge is a prerequisite for a good separation. To work in the best conditions and guarantee a better separation effect, it is necessary to configure the interlocking and alarm functions to protect the equipment, and the main and auxiliary motors must be controlled by independent inverters and separate start buttons must be established. In special circumstances, start the spiral separately. Wear affects both the separation effect of the centrifuge and the safe and stable operation of the instrument. In the process of transporting solid particles, the wear of the inner wall of the drum, spiral blades, etc. is very large. Therefore, a layer of protective material can be added to the key components to increase the working efficiency of the instrument and at the same time extend the useful life of the equipment. In addition, strengthening the daily maintenance and maintenance of mini centrifuges is also an essential task. Regularly inspect lubrication conditions such as main bearings and differentials, working temperature and vibration conditions to ensure safe and stable operation. And when the ambient temperature is less than 0 e, antifreeze work must be carried out.
The mini centrifuge is used by advanced countries in the world due to its simple operation and clear results. However, imported centrifuges are expensive and inconvenient. The mini-centrifuge is specially developed for use in microplates to facilitate the separation of the drops from the wall. The microplate can be installed vertically in the rotor of the centrifuge from the upper slot when it is used. The liquid is maintained under surface tension. The lower part of the microplate does not leak.
Mini-centrifuges In general, the basic models will be equipped with a dedicated rotor, while the high-end models will allow free options. In fact, one of the biggest functional differences between centrifuges is how many rotors a user can choose. It should be noted that the change between different models is generally not interchangeable. Therefore, it is necessary to seriously consider the combination of a centrifuge and a rotor before buying a mini centrifuge.
Mini centrifuge such as short circuits or open circuits in the rotor coils can be verified with a multimeter and the coils can be re-rolled. When the rotor is used, the centrifuge tube may break due to metal fatigue, excessive speed, excess tension, chemical corrosion, incorrect selection, use of unbalanced rotor heads and uncontrolled temperature. For the above cases, the operator is required to master the operating procedures, select properly the centrifugal tube and the centrifugal rotor, pay attention to strictly control the sequence of operation of each step, to minimize unnecessary human injuries, and use it in the factor of Safety and warranty period of the rotor.
BIORIDGE mini centrifuges utilize the company's proprietary, proprietary electrostatic technology, ultra low noise operation, brushless maintenance motors, durable, safe and reliable.